Proxxon Tools

 

Jig Saw Blades, Special Steel, 2pcs. No. 28054

Pitch of 1.5mm (1/16″), teeth ground and set. Usable on hard and soft woods, plywood, fiber-glass reinforced sheets as well as various plastics. Ideal for tight curves and clean cuts. For use with jig saws STS 12/E and STS/E.

$6.00


Jig Saw Blades, HSS, 2pcs. No. 28056

Pitch of 1.06mm (3/64”), teeth ground and set. Usable on metals, aluminum, and softer alloys, fiberglass, plexiglass and insulating materials. For use with jig saws STS 12/E and STS/E.

$8.00


Holder for drill/mill/polishing/etc. Bits No. 28359

For clean storage of micro drills, grinding bits, brushes and other rotating tools with shaft diameters of 2.35 - 3.22mm (3/32” - 1/8”). Without bits and cutters.

$5.00


MICROMOT Tool Clamp No. 28410

Whenever working free hand is difficult or dangerous, here is the solution for the stationary use of MICROMOT hand-held tools. With a tough fiberglass reinforced construction, this tool clamp perfectly fits around the body of our hand-held tools with aluminum-die cast head such as Professional Rotary Tool IBS/E (No. 38481). The tool clamp is easily clamped via two flaps on a vice.

$11.00


Precision Drill Grinder FBS 12/EF No. 28462

For precision drilling, milling, sanding, polishing, brushing, rust removal, engraving and cutting. Includes keyless chuck capacity 0.3 - 3.2mm (1/64” - 1/8”). A precision ball bearing minimizes spindle side play. Spindle lock button for that bit changing eliminates the need for spanners. Recessed spindle head for inserting MICROMOT steel collets. Special, balanced, low noise DC motor with high life expectancy. Variable speed control with feedback effect (high torque at low rpm’s) Housing of glass fiber reinforced POLYAMIDE.

$68.00


Rotary Tool MICROMOT 50/E No. 28510

A specially balanced motor makes this tool run very smoothly at variable speeds from 5,000 - 20,000 rpm (no load). It comes with 6 high precision triple steel collets in sizes 1 - 1.5 - 2 - 2.4 - 3 and 3.22mm ( 1/32” - 1/16” - 5/64” - 3/32” - 7/64” and 1/8”) which ensure accurate clamping of the bits for highest concentricity and the precision you need for the finest work pieces. Weight: 230g (1.2lbs), Length: 220mm (8 21/32”). Low voltage for optimal safety, 12V DC, Max 40W input.

$55.00


Rotary Tool MICROMOT 50/EF No. 28512

With quick-action chuck. Practical for use with multiple shank diameters. Slim, Easily handled and light. Quick-action chuck and electronic revolutions adjustment, with feedback effect (high torque at low rpm’s). Specialty balanced, low noise DC motor with high life expectancy. A transformer is required for operation.

$52.00


Jig Saw STS 12/E No. 28534

This very lightweight and powerful 12V machine is ideal for curved cuts in wood up to 10mm (3/8"), circuit boards up to 3mm (7/64") and non-ferrous metals up to 2.5mm (3/32") thickness. Its weight makes it easy to handle and thus allows for precise control of the cutting action. The specially balanced powerful permanent magnet motor with electronic speed control ensures variable speeds between 2,000 - 5,000 strokes/min., 100W, stroke: 6mm (15/64"). With additional, rounded foot for cuts on rounded surfaces and clean interior cuts. Is exchanged for the normal saw table by unscrewing a screw. Ideal for gourd carving. Includes 2 saw blades (coarse and fine).

$82.00


Pensander PS 13 No. 28594

This superfine sander with linear sanding motion (versus rotary or orbital) operates at 8,000 strokes per minute with a 3/32" (2.5mm) stroke. It is ideal for surfaces, slots and tight corners. Included are four sanding attachments with straight shanks and 4 with angled shanks (four different shapes per shank style) as well as 3 sheets of preprofiled adhesive sanding pads. The sheets are 180, 240 and 400 grit with 5 of each shape per sheet.

$42.00


Flexishaft MICROMOT 110/P with collets No. 28620

Two ball bearings in the turned light aluminum hand piece and one in the drive end prevent bits from chattering. The highly flexible shroud and core effortlessly transmit power without heating up even when bent tightly. Anti-kink springs at the grip and drive end. The flexishaft comes with 6 MICROMOT steel collets in sizes 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.4, 3.0 and 3.2mm). The drive shaft is 7/64" and so either fits our 7/64" steel collet or our chuck.

$43.00


Flexishaft MICROMOT 110/BF with keyless chuck No. 28622

As described for the Flexishaft MICROMOT 110/P, but with 1/64" - 1/8" (0.3 - 3.2mm) keyless chuck. Practical when working with different shaft diameters.

$40.00


Set of Tungsten Vanadium Precision Cutters, 5pcs No. 28710

Selected tungsten vanadium steel. Purposely made of stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. All shanks 2.35 or 3mm (3/32" or 7/64"). For use on hard and soft woods, non-ferrous metals and precious metals, as well as plastics and plaster of paris. Ideal for milling, routing, shaping, profiling and slotting.

$10.00


Set of Tungsten Vanadium Precision Cutters, 3pcs No. 28720

Selected tungsten vanadium steel. Purposely made of stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. All shanks 2.35 or 3mm (3/32" or 7/64"). For use on hard and soft woods, non-ferrous metals and precious metals, as well as plastics and plaster of paris. Ideal for milling, routing, shaping, profiling and slotting.

$13.00


Replacement Sandpaper for the PS 13 No. 28822

Three sheets, each with 20 pads (5 each of the four shapes, adhesive). 180 Grit.

$10.00


Replacement Sandpaper for the PS 13 No. 28824

Three sheets, each with 20 pads (5 each of the four shapes, adhesive). 240 Grit

$10.00


Replacement Sandpaper for the PS 13 No. 28826

Three sheets, each with 20 pads (5 each of the four shapes, adhesive). 400 Grit

$10.00


Tungsten Vanadium Cutter, Wheel, 2pcs No. 28727

Selected tungsten vanadium steel. Purposely made of stable construction with head and shaft out of a single blank. The precise flutes and optimal concentricity ensure best life expectancy. All shanks 2.35 or 3mm (3/32" or 7/64"). For use on hard and soft woods, non-ferrous metals and precious metals, as well as plastics and plaster of paris. Ideal for milling, routing, shaping, profiling and slotting.

$18.00


HSS Twist Drill Set with brad point No. 28876

1.5 - 2 - 2.5 - 3 - 3.5 - 4mm (1/64" - 5/64" - 3/32" - 1/8" - 9/64" -- 5/32"). The titanium nitrate coating reduces friction and increases life expectancy.

$23.00


Replacement Sanding Belts for Belt Sander BS/E No. 28581

Made from high-quality aluminum-oxide on tough, woven, lightweight cloth backing. For sanding metal, non-ferrous metal, wood and plastic. Set of 5. 180 Grit

$6.00


Replacement Sanding Belts for Belt Sander BS/E No. 28582

Made from high-quality aluminum-oxide on tough, woven, lightweight cloth backing. For sanding metal, non-ferrous metal, wood and plastic. Set of 5. 120 Grit

$6.00


Replacement Sanding Belts for Belt Sander BS/E No. 28583

Made from high-quality aluminum-oxide on tough, woven, lightweight cloth backing. For sanding metal, non-ferrous metal, wood and plastic. Set of 5. 80 Grit

$6.00


MICROMOT Steel Collet Set No. 28940

Fits all MICROMOT machines, except the engraver GG 12. One each in size 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.4, 3.0 and 3.2 mm) come as a set in a practical holder for storage along with one clamping nut.

$14.00


Sanding Drum with 10 sanding caps (5 each, 80 and 150 Grit) No. 28987

Made of standard compounds of tough consistency and different grits for different sanding/finishing stages. Use for furniture refinishing, removing rust, and multiple sanding/ finishing jobs on wood, plastic, leather, non-ferrous metal, steel, welded joints and castings. Ideal for surface and shape sanding, smoothing of surfaces, edges, even inside curves and tough to reach areas. All shanks of pad and drum carriers 3mm Ø (7/64").

$21.00


Replacement Sanding Caps, 10 pcs (5 each, 80 and 150 Grit) No. 28989

Made of standard compounds of tough consistency and different grits for different sanding/finishing stages. Use for furniture refinishing, removing rust, and multiple sanding/ finishing jobs on wood, plastic, leather, non-ferrous metal, steel, welded joints and castings. Ideal for surface and shape sanding, smoothing of surfaces, edges, even inside curves and tough to reach areas. All shanks of pad and drum carriers 3mm Ø (7/64").

$15.00


MICROMOT Extension cord. 10 feet (300cm) No. 28992

For all 12V machines. Plug and wall-socket reverse polarity- protected.

$12.00


The Precision Rotary Tool FBS 115/E No. 38472

1001 uses for drilling, milling, grinding, polishing, brushing, de-burring, rust removal, engraving, carving and cutting. A special motor technology (no replacing of brushes necessary) with full-wave electronic speed control allows for powerful operation with constant torque, even at low speeds! This feature is especially important when micro-drilling, brushing and polishing on delicate materials (e.g. plastics, etc.). The extremely balanced motor, which makes the tool run smoothly and vibration-free, as well as low weight and the improved ergonomic design with the soft-grip two-component material allow for optimal control while working. The spindle runs in a precision ball bearing. A button locks the spindle for an easy exchange of bits. The keyless precision chuck allows for quick exchange of all accessories with shanks from Ø 1/64" to Ø 1/8" (0.3 - 3.2mm). The tool’s 4/5" (20mm) standard collar makes it fit easily into all other useful MICROMOT accessories, such as drill stands and vices, making this Precision Rotary Tool even more versatile.

$92.00


Professional Rotary Tool IBS/E No. 38481

This high-revving motor has full-wave electronic speed control capable of producing variable speeds between 5,000 and 20,000rpm and is usable for extended periods at a time producing an exceptional power/ weight ratio. The streamlined die-cast aluminum head provides a stable housing for the ground steel spindle. It runs in a ball bearing assembly, minimizing play (max. runout 0.001"). The tool comes with six high concentricity collets sized 1/32", 1/16", 5/64", 3/32", 7/64" and 1/8" (1.0, 1.5, 2.0, 2.4, 3.0 and 3.2mm) along with a collet nut as well as a selection of 34 industrial quality bits and cutters with shanks Ø 3/32" (2.3mm).

$127.00


Belt Sander BS/E No. 38536

A light, compact and user-friendly unit that makes sanding in tight spaces more convenient. Used in modeling, sculpturing, tool- and die-making or the automotive sector. The belt sander has a speed control for variable speeds from 12 - 25ft/s (225 - 450m/min), which enables to work on many different materials, such as wood, metal or plastic. It can be used for grinding and enlarging small openings, grinding in notches, regrinding moulds or polishing (flat surfaces). It is also great for deburring, rounding edges or removing paint. Recentering or tilting the belt is easily done with a screwdriver. The belt arm itself is adjustable within an angle of 60° by the push of a button on the head.

$159.00


Footswitch FS No. 38700

This attachment frees your hands for easy on/off operation. To be used for all machines with a maximum power consumption of 5/8hp (500W) with two prong plugs. The switch has a housing of glass-fiber-reinforced nylon. The connecting cord is 3ft. 21" (250cm) in length and the output cord is 19.5" (50cm). Ideal for both portable and stationary machines. If you are working with our 12V hand-held machines, the Footwitch FS is connected to the transformer.

$20.00


MICROMOT AC Adapter NG 5/E No. 38704

This workstation with electronic speed control comes in a compact Noryl casing (the material is heat resistant, recommended for transformers) and has a capacity of 5.0A at 16V no load and 12 Volt under load = 60VA (DC). Primary supply at 110 - 120V. The thyristor electronic control (with feedback) allows for optimum tool speed and high torque at low speeds. The workstation offers three polarized sockets for MICROMOT machines, so that three different tools can be plugged in at a time. In addition the unit features one pair of sockets for standard banana plugs with 5/32" (4mm) diameter. It provides a master switch for turning off the transformer without needing to unplug. The red LED indicates "ready". A PTC (positive temperature coefficient) element guarantees protection against overload, the plugged in machine will not restart automatically. After cooling down, the AC wall plug should briefly be unplugged to reset the adapter. The unit comes in a very compact and practical design with storage holes for insert bits and cutters with shafts of 3/32" and 7/64" (2.35 and 3mm). The foldable tool rest keeps the MICROMOT tool ready for being used and standing by safely. Tool and accessories not included.

$79.00


MICROMOT AC Adapter NG 2/S No. 38706

Very compact design. Noryl casing (heat resistant - a necessity for transformer enclosures). Capacity 2,0A at 16 Volt open circuit - and 12 Volt under load = 24VA (DC). Primary supply 110 - 120V. Polarized socket for MICROMOT plug. Red LED indicates readiness for use. PTC (Positive temperature coefficient) element prevents overload, plugged in tool will not automatically restart. After cooling down, the AC wall plug should be disconnected briefly to reset the adapter. Modern design with holes for storing bits. Foldable tool rest provides a secure place for keeping the MICROMOT tool ready for use. Tool and accessories not included.

$33.00


 

%d bloggers like this: